Diaper Dictionery

Word	Meaning
Absorption	The capacity of a material to take a liquid
ADL	Acquisition Distribution Layer, a patch used on top of the pad as a reservoir to give time to the SAP to work reducing leakages
Air Laid	The process of dispersing fibers in a moving airstream and then collecting on a forming surface to produce lofty, porous webs
Anvil	A smooth roll or a fixed flat plate located opposite to the cutting die or the knife. For example: cutting trim with a Rotary knife and Anvil.
Aperture Film	A special kind of ADL made using a 3 dimensional perforated film, the orifices are conical to allow liquids in but resisting the flow to the out.
Bale	A package in which compressed fibers are shipped
Baby Pant	They used to be called Training Pants, today they are called Baby Pants as many times they can be used without potty training.
Back Sheet	The outer layer of the diaper made of film or a textile laminate designed to contain liquids.
Barrier Leg Cuff	The raised cuff made of hydrophobic nonwoven used in baby or adult diapers and designed to prevent leakage to the legs.
Basis weight	Weight of a unit area for a sheet or a web. For example: a basis weight of 20 gsm
Blue Barrier	Piece of film placed between the backsheet and the topsheet at the waist location during the 80`s and 90`s, it was replaced by the waist elastic
Bond Strength	The force needed to separate layers in a laminated structure, or to break the fiber-to-fiber bonds in a nonwoven
Breathable Back Sheet	A breathable backing material on an absorbent product, usually made of polyethylene with Calcium Carbonate micro particles.
Calender	Two or more cylinders or rolls that can apply controlled and uniform pressure to a fabric or web as it goes through the nip
Calendering	Process that subjects fabric to pressure and sometimes heat in order to bond, emboss, or compact
Carrier Tissue	A sheet of paper used under the pad to help it to go trough the pad knife (without a carrier the pad wraps on the knife)
Carrier Web	A transporting member for moving a material through a processing stage
Cellulose	A polymeric substance that constitutes the chief part of the cell wall of plants, such as cotton or pine trees
Centrifugal Retention	The amount of urine still retained by a diaper after being subjected to a centrifugal machine for a specified amount of time.
Chill Roll/ Chill Plate	A refrigerated roller or stainless metal plate, used to help the hot melt cool down quickl,y reducing hot melt migration to the machine.
Cloth Like Back Sheet	A backing material used in an absorbent product, usually made of polyethylene laminated with nonwoven
Continuous Pad Forming	The pad is formed using pockets without any spacing, later the pad has to be cut into individual pieces to produce the diaper pads.
Converting (Converter)	Final steps in manufacturing nonwoven products from roll goods. A diaper producer is a nonwoven converter
Cover stock	Lightweight material used to cover absorbent cores in medial or hygienic products.
Creep	Deformation exhibited by a material when held at constant stress or applied force. Look also for "neck down".
Cross Direction (CD)	Perpendicular to the direction in which a fabric moves through a machine.
Cross- Linking	The process by which polymers form bonds between molecular chains, to form a three-dimensional polymeric network.
Cuffs (Leg Cuffs)	Same as Barrier Leg Cuffs
Curly Fiber	Special kind of pulp mechanically and chemically treated to be resilient when wet, also used as an internal ADL.
DDN	A short name for the Disposable Diaper Network, the largest network of diaper industry contacts in the world, meeting at LinkedIn
Decitex	The weight, in grams, of 100 meters of a fiber.
Delamination	The separation of layers of a laminated sheet because of lack of a good bond
Denier	A unit of fineness for fibers, based on a standard mass per length of 1 gram per 9,000 meters of yarn (the lower the number, the finer the fiber).
Die Cut	Rotary knife used to cut the shape for the legs in the diaper process.
Disc Mill	Disc mill crushes (fiberizes) items by grinding them between two interconnected plates. Less energy than a hammer mill but no water spray)
Discrete Pad Formation	The pad is made with individual pockets where the pad is not connected at the ends, it does not require a knife (mostly used at lower speeds)
Diaper Network Group	Largest network of diaper industry contacts with members representing the diaper industry in more than 150 countries, meeting at LinkedIn.
Distribution Layer	A high loft nonwoven used on top of the absorbent pad to move liquids quickly.

Components of a typical disposable diaper

Components of a typical disposable diaper

1) Polyethylene or cloth-like film: This is used as the back sheet that prevents the liquids from leaking out of the diaper. The back-sheet can also be given a cloth-like look, by adding a thin polypropylene non-woven sheet to the film, using either the hot melt process or the heat and pressure method with direct extrusion to the nonwoven. Contrary to popular belief, the cloth-like back sheet is not cloth -it is made of plastics. Breathable cloth-like material can also be used instead of the film. Not many know that even a breathable diaper with 200 ml of urine loses less than 2.5% of its weight over a period of 24 hours and this evaporation is enough the cool the diaper, which may not be as comfortable at night. For more information about “breathability” please use this link: breathable diapers.

2) Tissue: A special tissue paper that is different from the regular bathroom tissue and has a higher elasticity and wet strength is another important component of a diaper. The tissue essentially serves as a carrier for the pad (the pad is the absorbent core of the diaper) and helps reduce the pin holes created during the compression process carried out by continuous drum forming systems. This tissue, typically at 16 grams/m2 (also abbreviated as GSM) or more, protects the inner plastic from the superabsorbent particles. Instead of tissue, it is possible to use a low gage SMS nonwoven material as the carrier (for the pad), it can be placed right next to the back sheet or as a full wrap material around the core. In order for the SMS carrier to be cost competitive against tissue paper, it needs to be less than 12 GSM.

3) Hot Melts: They are used to glue the different components of the diaper, such as the pad and the elastics. They are made of a mixture of resins, oils and tackifiers. The hot melt adhesive is applied in molten form and when it cools down it provides the required bonding force to glue the materials. Most of the times two types of adhesives are used: a construction adhesive, for the back sheet and the nonwovens, and an elastomeric adhesive, for the leg and waist foam elastics. The elastomeric adhesive has higher elasticity and bonding strength and it is generally more expensive than construction adhesives. When the diaper pad is very thin, another specialty adhesive known as “pad integrity adhesive” is also used to add strength to the diaper core when it is wet. This integrity adhesive is especially useful when SAP loadings exceed 25% of the total pad weight -i.e. when the weight of the SAP is more than a quarter of the weight of the pad. For a list of hot melt suppliers follow this link: Hot Melts.

4) Hydrophobic Non-woven: It is used as a top sheet for the leg cuffs; it prevents water from passing through. It is made of polypropylene resin without any added surface surfactants. The hydrophobic nonwoven prevents leakage out of diaper. By applying a surfactant to a restricted area, it is possible to make a roll of hydrophobic nonwoven only partially phallic. This is known as the Zebra process and it is an important feature designed to avoid leakage during leg cuff construction.

5) Hydrophilic Non-woven: It is the main top sheet, the top surface that is in contact with the baby’s skin. It allows the liquids to flow into the diaper core. The difference between the two non-woven’s (phallic and phobic) is the surfactant treatment used in the process. The surfactant treatment reduces the surface tension of the nonwoven, reduces the contact angle with the liquid and allows it to pass. Flow dynamics within the diaper core prevent liquids from returning to the surface. Most nonwovens used in diapers are made with the spun bonding process, though it is possible to use thermal bonded nonwovens also, which are softer but have lower resistance and strength. Trough Air Bonded nonwovens which are more lofty, can also be used. For nonwoven suppliers use this link: Nonwovens.

6) Elastics: Used to improve the fit of the diaper, usually made of polyurethane or polyester foam, synthetic rubber or Lycra® (also known with the generic name Spandex). They are used in cuffs, for the waist and the legs; they can also be used as lateral side panels and in tape construction. Most gasketing cuffs use spandex to provide a seal with the baby’s legs. Spandex can stretch as much as 400% of its original length before it breaks, however it is typically used at less than 300% stretch. New generations of softer and stronger elastic materials are reportedly in the pipeline. For a list of suppliers use this link: Elastomeric.

7) Lateral Tapes: In premium diapers, Velcro type materials have been used to provide mechanical grip, it is also known as the “hook tape”. In lower priced diapers, adhesive tapes made of polypropylene are used. Then there are new versions of elasticized Nonwoven Velcro Tapes. In a few years baby diapers may replace training pants with the help of these new stretchable fastening systems that offer the same characteristics to the consumer but cost less. Some adult diapers use what is called the “target tape” system, where the tape has two adhesive tabs to avoid the need for a frontal tape. This is a cheaper alternative for adult diapers but not as good as the one using a frontal tape which does not require repositioning of the tape on top of the target. For a list of suppliers use this link: Tapes and Closure systems.

Frontal Tapes: This is used to facilitate multiple repositioning of the lateral tape without tearing the back-sheet, it is made of polypropylene film and attached to the front of the diaper with adhesive. Its use has helped to reduce the thickness of the poly film without the risk of potential tears associated with the opening of the lateral tapes from the backsheet. In premium diapers, a special loop system has been developed in order to use of Velcro type fasteners (also called the “hook and loop” system). This loop tape can use a “locked loop” or a “brushed loop” in order to provide a softer texture or a stronger grip. A new generation of nonwoven materials expected to be commercialized in a few years, may eliminate the need for frontal tapes – the whole backsheet will be used to reposition mechanical tapes. The frontal tape can have a printed design which can be random or synchronized, some patents may protect the use of synchronized printing in some markets. Tapes and Clossure systems.

9) Cellulose: Used in the construction of the pad, it gives integrity and absorbing capacity to the diaper. The capacity of normal cellulose pulp is around 10 cc of water per gram of pulp when the diaper is in “free swell” but less than 2 cc when subjected to 5 KPa of pressure; that is why a superabsorbent material is also needed to hold the liquids under pressure. Cellulose comes from pine trees, generally obtained from well managed forests. Liquids are absorbed by the capillaries in the void spaces between the fibers and the surface tension angle between the fibers and the water. Typical fiber length used in diapers is about 2.6 mm. An alternative to pulp is to use air laid synthetic fibers. However, it is still difficult for air laid synthetics to compete with pulp, unless it is a niche market product and thickness is more important for the consumer (as in case of some sanitary napkins and the adult diapers used by active people) than the cost. Cellulose acetate, the material used to make cigarette filters, has been used in some absorbent products. PP synthetic fibers have also been attempted for absorbent core formation. For a list of pulp suppliers use this link: Fluff Pulp.

10) Acquisition and Distribution Layer: Also known with its abbreviation ADL, it is a sub layer used between the top sheet and the absorbent core. Sometimes used in full length but mostly preferred as a patch near the target zone where urine is most likely to be deposited. This sub layer is specially needed when the absorbent core is very thin -the sub layer quickly moves liquids into the absorbent core and reduces potential leakage. The ADL is very important to provide a sense of dryness to the skin, providing additional separation between the wet pad and the skin. ADL’s should be used whenever the mix of SAP in the absorbent core exceeds about 15% by weight or when the liquid penetration time requires a boost in order to avoid diaper leakage due to liquid accumulation inside the diaper. ADL’s are made either of through air bond (TAB) nonwovens, “curly” fibers such as in P&G’s pampers and some Ontex diapers, or some kind of “high loft” nonwoven. An aperture film, made of perforated plastic film, has also been used successfully in some markets. Lower priced diapers sometimes use resin bonded nonwovens, but they do not work as well. For acquisition nonwoven suppliers use this link: Nonwovens.

11) Sodium Polyacrylate: Also known as super-absorbent or “SAP” (super absorbent polymer), Kimberly Clark used to call it SAM (super absorbent material). It is typically used in fine granular form (like table salt). It helps improve capacity for better retention in a disposable diaper, allowing the product to be thinner with improved performance and less usage of pine fluff pulp. The molecular structure of the polyacrylate has sodium carboxylate groups hanging off the main chain. When it comes in contact with water, the sodium detaches itself, leaving only carboxyl ions. Being negatively charged, these ions repel one another so that the polymer unwinds and absorbs water, which is attracted by the sodium atoms. The polymer also has cross-links, which effectively leads to a three-dimensional structure. It has high molecular weight of more than a million; thus, instead of getting dissolved, it solidifies into a gel. The Hydrogen in the water (H-O-H) is trapped by the acrylate due to the atomic bonds associated with the polarity forces between the atoms. Electrolytes in the liquid, such as salt minerals (urine contains 0.9% of minerals), reduce polarity, thereby affecting superabsorbent properties, especially with regard to the superabsorbent capacity for liquid retention. This is the main reason why diapers containing SAP should never be tested with plain water. Linear molecular configurations have less total capacity than non-linear molecules but, on the other hand, retention of liquid in a linear molecule is higher than in a non-linear molecule, due to improved polarity.

The superabsorbent can be designed to absorb higher amounts of liquids (with less retention) or very high retentions (but lower capacity). In addition, a surface cross linker can be added to the superabsorbent particle to help it move liquids while it is saturated. This helps avoid formation of “gel blocks”, the phenomenon that describes the impossibility of moving liquids once a SAP particle gets saturated. Please read the history section for more information. To get more answers about this superabsorbent material, please use the link: Frequent questions about SAP

12) Top Sheet surface add-on lotions:

In order to create novelties for product differentiation, several topical lotions are added to the nonwoven top sheet, among others: Aloe Vera, Vitamin E, Petrolatum, Almond Oil, Vitamin D, Oat Extract, Jojoba, etc. There is another trend to use antibacterial lotions (such as tertiary ammonia or silver salt compounds); however, many pediatricians are against its use for obvious reasons.

13) Decorated Films and wetness indicators: For even greater product differentiation, some diapers use decorated films underneath the cloth-like backsheet. Some use as many as nine inks with all kinds of well known characters such as Disney, Sesame Street, Soccer teams, etc. Another gimmick they use is a wetness indicator. This is typically used for adult products but some baby diapers also use it.